Thursday, October 8, 2009

Custom 70's Influenced Round Pin for Kawika




Shaped from custom rockered Blair blank w/ 1/8"cedar/1/8"bass/1/8"cedar T-band w black glue lines 1 5/8" out.

6 comments:

  1. Planning ahead for El Nino?

    ReplyDelete
  2. Boards like that look terrific but don't get ridden much. That's why so many of them become wall hangers.

    ReplyDelete
  3. I agree the old orginals from the 70's weren't practical for dribbly 2' beach breaks.

    With my 70's influenced model, I have taken the positive attributes of the orginal verstion's like the wide point forward, volume forward, low entry deck rocker, pendulem swing, etc,.. of the orginal's.

    With out divluging too much I have modified my version with changes to rocker, foil, bottom contours and fin config to have much more pragmatic performance in all around moderate to solid surf. Hence the name of this model 70's "Influenced" Round Pin.

    W>

    ReplyDelete
  4. that looks like a good board for big p.v.

    ReplyDelete
  5. i would rather run for cover than pull that bad boy out!

    ReplyDelete
    Replies
    1. No need to run you can charge with confidence. The correct tool for job makes all the diff. :-)

      Delete